The ISO 40 mm sectional door combines high-quality thermal and acoustic insulation with a modern and slimline design.

It offers aesthetic and functional flexibility, allowing for a custom configuration for each situation.

• Maximum dimensions:
  • Width 8,000 mm
  • Height 6,000 mm
  • Maximum area 48 m²
  • Panel thickness: 40 mm
  • U-value: 0.99 W/m²K for a door of 5,000 x 5,000 mm
  • Wind resistance: Class 3-4 (EN 12424), equivalent to 12-13 Beaufort (118-149 km/h)
    
    
• Operation: Electric or manual
  
  
• Compliance: EN 13241 Standard

• Components and Construction: The ISO 40 mm sectional door consists of horizontal panels that move under the ceiling during opening.
  Torsion springs counterbalance the weight of the curtain, facilitating manual operation.
  Various lift types are available: standard, semi-vertical, vertical, inclined, and reduced.
  
  
• Materials: CFC-free polyurethane foam insulation Galvanized steel sandwich panels 40 mm thick.
  Section end caps, guide rails, and fittings in galvanized steel.
  Nylon rollers with ball bearings and 11 mm galvanized steel shafts.
  Steel cables with a safety factor of 6.
  PVC external handle for manual doors.
  EPDM rubber seals (top, sides, bottom, and between panels).
  Exterior panel finish: Polyester paint coating available in 19 standard colors (RAL3000, RAL5003, RAL5010, RAL6005, RAL6009, RAL7005, RAL7015, RAL7016, RAL7021, RAL7022, RAL7035, RAL8014, RAL9002, RAL9005, RAL9006, RAL9007, RAL9010, Goosewing Grey, Merlin Grey). Other RAL colors available upon request.
  Interior panels: Horizontal profile, painted in RAL 9002, other RAL shades available upon request.
  
  
• Windows: Right-angled or rounded, single or double insulated walls
  Anti-burglary options: Limited-height or round windows
  
  
• Glazed panels: Anodized aluminum with insulated double glazing (acrylic, polycarbonate, Plexiglas), 5-chamber polycarbonate honeycomb glazing, or single-wall perforated ALU plate.
  
  
• Drive: The door can be operated by pull cord, chain hoist, or electric motor with reducer.
  
  
• Standard controls available: Deadman, impulse, or remote control.
  
  
• Technical specifications of the electric motor: Network voltage: 1N-230V-PE / 3-230V-PE / 3N-400V-PE / 3-400V-PE Network frequency: 50 / 60Hz Protection: IP54
  
  
• Safety Safety devices: Man-height chain and emergency release Spring break parachute Cable slack safety.
  
  
• Control Panel and Options Electrical output voltage: 24Vdc Electrical power supply components: 24Vdc (350mA) / 230Vac (1.6A)
  Control system and Accessories: Quick model with frequency converter.
  
  
• Features: Status display and cycle counter information; Opening force control.
• Speed adjustment: gradual start, gradual stop, braking point.
  
  
• Additional control devices: Pull switch, key switch, push button, photoelectric cell, radar, induction loop detector, remote control.
  
  
• Installation and connection requirements: Specific technical specifications are available for each model and lift system.
  For electric motors with control panel, a